[BCAB] Braille Sense: Connecting to EE Wireless Router

Steve Nutt steve at comproom.co.uk
Tue Jun 11 12:07:11 BST 2019


Hi Mo,

Try it on Channel 11.  I think Andrew is saying that he doesn't use it
because it doesn't support higher channels.  Lower ones tend to be more
crowded.

All the best

Steve

-----Original Message-----
From: Mobeen Iqbal <mobeeniqbal at gmail.com> 
Sent: 11 June 2019 10:25
To: BCAB Discussion List <bcab at lists.bcab.org.uk>
Subject: Re: [BCAB] Braille Sense: Connecting to EE Wireless Router

Hi Andrew.

I have my second gen stream working on wireless channel 5. Perhaps you could
try yours on 5 to see what kind of signal strength you get? I'm using the
orbi.

Cheers,

Mo.


On 11/06/2019 10:21, Andrew Hodgson wrote:
> Hi,
>
> If the BrailleSense is not seeing any wireless SSID when you scan for
wireless networks then you have to deal with that rather than trying to put
in other names manually for the SSID.
>
> My guess is that the router uses an automatic channel selection to find
the best channel for the local area which is not populated, and it has homed
in on a channel outside the range that the BrailleSense supports.  I have
this problem on the Victor Reader Stream as well.
>
> To fix this you need to go into the router settings and find the settings
concerning channel on the 2.4 wireless network.  If it is set to auto then
you need to change it to a lower number (for example in my case it was set
to auto and was picking channel 11 which didn't work).  Once done see if the
BrailleSense can see the wireless network.  Once it can see the wireless
network you should be good to go.
>
> To be honest I don't use my Victor Stream with wireless because of this
issue, I would rather get a stronger wireless signal on a better channel
than have to make it static to accomodate this one device.
>
> Thanks.
> Andrew.
> ________________________________________
> From: Pele West [pele.westlists at gmail.com]
> Sent: 11 June 2019 10:01
> To: BCAB Discussion List
> Subject: Re: [BCAB] Braille Sense: Connecting to EE Wireless Router
>
> Hi Steve
>
> Thanks for writing.
>
> So, to confirm, what is the format of the 2.4 G channel name? Do you 
> put -2.4g or -24g? Do you have to have two profiles on the Braille 
> Sense, one for each channel?
>
> Apologies if these are silly questions, I am out of my depth here.
>
> Pele
>
>
> --
> To find out more about BCAB and the benefits that membership can 
> bring, please visit our website: https://www.bcab.org.uk/ Manage your 
> subscription by logging in with your BCAB account details at : 
> https://www.bcab.org.uk/user_mailman_register
> Access the publicly searchable list archives at: 
> https://lists.bcab.org.uk/pipermail/bcab/
> To discuss matters relating to the mailing list, please email:
moderator at bcab.org.uk.
>

--
To find out more about BCAB and the benefits that membership can bring,
please visit our website: https://www.bcab.org.uk/ Manage your subscription
by logging in with your BCAB account details at :
https://www.bcab.org.uk/user_mailman_register
Access the publicly searchable list archives at:
https://lists.bcab.org.uk/pipermail/bcab/
To discuss matters relating to the mailing list, please email:
moderator at bcab.org.uk.





More information about the Bcab mailing list